Latest News

Measures From The Outside

Measures From The Outside

Gobius level indicator kits are different. This innovative patented product is the only one like it in the market. No drilling, no screws – in fact, no penetration into the tank in anyway. The Gobius sensors have a special adhesive tape that holds the sensors on the side of any tank. This avoids complicated installation procedures. Gobius can be used for fuel, freshwater or waste water (sewage). Any tank, any size and any liquid.

Gobius is very easy to install, and is most often done in just a few minutes. Because Gobius is installed on the side of the tank, this means the tank can be any shape and size, and it will still produce a true reading. Because Gobius measures from the outside, this means you will never need to clean your level kit again. This is great news for blackwater tanks, but will work for all tanks and liquids.

Gobius sensor technology is best described as “knock and listen”. The Gobius sensor consists of a shaker that creates a vibration on the inside of the tank wall. This then sends the signal to an accelerometer, which measures the vibration. The data is then passed to the control module, which calculates the level and shows a reading from empty, 1/4, 1/2, 3/4 to full. This makes it possible to measure the level of any tank, size, liquid or shape. With only one moving part, this makes Gobius a very reliable product.

Gobius is easily installed and will work through Polypropylene 2mm-10mm, Polyethylene 2mm-10mm, Stainless Steel 1mm-3mm, Aluminium 2mm-5mm, Standard Steel 1mm-3mm, and Fibreglass 4mm-8mm, no matter the condition inside the tank. This makes Gobius perfect for sewage tanks, but built for any liquid and tank.

Gobius fuel, water and waste level kits have an additional analogue output so they will connect to your current gauge: VDO, Wema, Teleflex, Faria, Phillippi etc. Any gauge with the ohm range of 10-180ohm, 240-33ohm, and 4-20ohm. Gobius will also interface with NMEA2000, Mercury Vessel View, and other digital computerised displays.

A Gobius Plus version is also available. This is the same as the standard Gobius unit but with the added feature of being able to turn pumps on or off when a level of empty or full is reached (relay required). Gobius is supplied ready for 12v or 24v. 240V on request. Audible and visual alarms can also be fitted and supplied for Gobius and Gobius Plus.

To order, please phone 07 55716764, or email info@catagroup.com.au, or visit www.catagroup.com.au.

 

 

(May-Aug2017)

Related Media Releases Articles

Similar Posts From Media Releases Category

No Comments so far

Jump into a conversation

No Comments Yet!

You can be the one to start a conversation.

Your data will be safe!Your e-mail address will not be published. Also other data will not be shared with third person.