Six 10 Thickened Epoxy Adhesive is a useful adhesive that adds convenience to the versatile WEST SYSTEM product line. It is completely compatible with all other WEST SYSTEM products so that it can be used on top of, or underneath, any 105 Resinbased epoxies, whether cured or uncured.
Six10 Thickened Epoxy Adhesive combines the strength, reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.
Six10’s shear thinning properties make it “thinner” as it’s worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies.
Each tube of Six10 contains 190ml and comes equipped with a static mixing wand. Additional static mixers are available in packs of 2 and 12.
For repair and construction – The Six10 has a long open time which means the epoxy will stay workable for 42 minutes in the static mixer and before clamping is required – very practical for long or complicated assemblies.
More than a glue – All adhesives rely on good surface “wet out” and saturation to achieve a good bond to the substrate. Six10 has a viscosity high enough to resist sagging but can still saturate and wet-out a surface without pre coating, thanks in part to shear thinning. This property also enables it to wet out light to moderate weight-reinforcing fabrics such as fiberglass and carbon fiber. Six10 is ideal for small repair and reinforcing projects.
Six10 is available through the WEST SYSTEM national dealer network.
July-September 2021
